Home server/Case guide

A short list of cases to stuff your drives in. If you have any good recommendations post them in the /hsg/ thread or create an account and add it to the list you lazy fuck. Rackmount cases are also welcome. If you own, or have owned one of these cases feel free to write a short review about what you like and dislike about the case. I will try to add as much detail to the pros and cons list as possible, especially anything that would help people avoid unfortunate surprises.

Consumer cases

6 or Less Drives⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
	BitFenix Phenom Mini ITX	5+1 (use included adapter for 5.25 bay)	0	ITX	Compact Surprisingly large storage capacity for size Decent cable management for the size Supports large expansion cards/gpus and cpu coolers	Harder to find (might be discontinued?) Limited to ITX only Pricey (over 200USD on newegg at time of writing) Try to find used Limited expandability, only two expansion slots
	Cooler Master Elite 110	3	1	ITX	Compact Good airflow from the large intake fan Good price (50USD) Good build quality for the price	Limited storage Limited expandability, only two expansion slots Limited to ITX only Cramped, wiring might be a pain Limitations on expansion card length PSU sticks out the back, might be annoying for some
	Fractal Design Core 500	3	3	ITX, DTX	Good price (50USD) Shape allows for longer expansion cards than other SFF cases Mini ITX, Mini DTX motherboard compatibility	Limited storage Limited expandability, only two expansion slots Limited to small form factor motherboards Motherboards with SATA ports that are angled 90 degrees may conflict with installation As large as the node 304, but supports less 3.5in drives Wiring can be a bit difficult if you put an optical drive in the included 5.25in bay
	Fractal Design Node 304	6	0	ITX, Thin Mini ITX, DTX	Surprisingly large storage capacity for size Shape allows for longer expansion cards than other SFF cases Supports Three SFF form factors, ITX, thin ITX, DTX	Limited expandability, only two expansion slots Limited to small form factor motherboards Larger than most other ITX cases
	Cooler Master N200	3	4	mATX, ITX	Good price (40-50USD) Reasonable wiring options	Limited storage Very large compared to other options in this category
	Chenbro SR30169T3	4	2	Mini ITX	Looks absolutely sick Very high end construction, just a scaled down version of what you'd expect from a rack mount vendor Hot swap bays are legit, no chinky plastics or "tooless" Autistic airflow route favours keeping drives cool over everything else (average 30C idle temp of 4x 10TB non-helium drives)	Expensive AF (100+ USD) As supplied, there are holes at the top and backplane of the drive bays which creates a infinite loop of hot air (fixed with sticky tape) Not suitable for >100W TDP chips Extremely painful serviceability, you need to take the MB out to get the PSU out unless your cooler is under 35mm, the ducted 120mm fan is the last to go in first to come out and is held in with the worlds firmest plastic clip
	SAMA IM01/Inter-Tech IM-1 Pocket	max 5	max 7	mATX, ITX	Small form factor (22L) with room for mATX Lots of drive mounting points for it's size	Drive mounting points equal as fan mounting points (more drives, less fans) Max drives only possible with SFX PSU
	Jonsbo N1	5	1	ITX	looks sleek and compact large amount of drives for its size (13L)	shilled by LTT is actually a bit blue instead of silver may have to remove front cover if there are heat issues (looks okay without it too)

6-10 Drives⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
	Fractal Design Node 804	8 (10 if bottom 2 mounting points are used)	2 (4 if bottom 2 mounting points are used)	mATX, ITX	Lots of storage options. 2 2.5in mounts (inside front panel), and 2 mounts for drives of either size (attached directly to bottom of case) Separated design allows for dedicated airflow over drives Reasonably expandable, 5 Full Height Expansion slots	No tie downs making wire management a bit difficult Drive caddies require an adapter for drives which lack the middle mount hole, you can get these from Fractal Design via their support portal, buy them when they are in stock, or you can 3D Print your own Cube shape might not work for some narrower spaces Cable clearance on the second cage is questionable Use angled sata cables if possible and be careful with SAS to sata cables if using SAS drives
	Lian Li Q26	10	1	ITX	Compact Lots of storage capacity for the size	Due to the form factor limitation, you will need an HBA Cramped, wiring will be a pain Heavy restrictions on expansion card and cpu cooler size Limited expandability, only 2 expansion slots Harder to find due to being discontinued Limited to ITX only
	Fractal Design Define R6	11 (if all tray slots are used)	2	ATX, mATX, ITX	Plenty of expansion options Good wire management options Highly customizable storage layout	You need to purchase extra trays because it only comes with 6 You might need an HBA to support >8 drives Pricy Large
	Antec P101 Silent	8	2	EATX, ATX, mATX, ITX	Plenty of airflow over the drives with three intake fans Relatively cheap, (~100USD) Supports a wide range of motherboards including E-ATX Good wire management options Plenty of expansion options	Trays do not support drives with non-standard mounting points (shucked drives and some NAS drives) Large
	Cooler Master N400	7+1 external	2	ATX, mATX, ITX	Cheap. Can be found for ~60USD or less used Plenty of expansion options	Recessed motherboard mounting position might have issues with motherboards that have 90° sata ports or USB headers PCI covers are break-off and can't be re-attached Iffy cable management
	SilverStone DS380b	8 (7 w/ HBA unmodded)	4	ITX, DTX (modded)	Compact. Hot-swap SATA/SAS backplane with SATA/Molex power. Additional 2.5" bay with 4 slots.	One 3.5" bay is blocked by HBA without modding plastic bracket. Poor airflow/temps. Fan swap+airduct (cardboard/3D print) and flipping PSU to exhaust is highly recommended. Zero cable management. A bit expensive new at around $200 Requires SFX PSU (preferably modular).

More Than 10 drives⠀

• A note on large storage arrays with 10+ drives. Most motherboards have less than 10 Sata ports. Once you start getting above 10 drives you will likely need to buy an HBA to support more drives than your motherboard is capable of handling. The recommended approach is to use a SAS HBA with SAS to Sata breakout cables. You can learn more about these on the Home server page.

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
	Fractal Design Define 7	11 (12) + 2 (1 in front of PSU and 2 covering top exhaust fan slots)	4	E-ATX(285 mm), ATX, mATX, ITX	Huge storage capacity Highly customizable storage layout Good wire management options Supports a wide range of motherboard form factors	Only comes with 6 x 3.5 type B trays, packs of 2 are ~$15 or you can 3d print them from here) Large Somewhat pricey. (sometimes goes on sale for < 100USD)
	Fractal Design Define 7 XL	18 (if all tray slots are used)	5	SSI CEB, SSI EEB, EE-ATX, E-ATX, ATX, mATX, ITX	Huge storage capacity Tons of Expandability options Highly customizable storage layout Good wire management options Supports a wide range of motherboard form factors	Only comes with 6 x 3.5 type B trays, packs of 2 are ~$15 or you can 3d print them from here) Large Pricy, especially when factoring in extra drive trays
	Corsair 750D	6 (12 with extra drive cages, 24 modded )	4	XL ATX, E-ATX, ATX, mATX, ITX	Huge potential storage capacity Supports a wide range of motherboards Plenty of wire management options Tons of Expandability options. 9 Full-Height Expansion Slots Front three optical drive bays can be converted with an adapter for even more storage	You need to buy more cages to do so as it only comes with two You will probably run into heat issues if going the modded route More drive cages restricts motherboard and GPU size Large
	Cooler Master CM Stacker 810 (or any CM stacker case)	0 (up to 20 if modded, using 5.25 to 3.5 adapters)	0	XL ATX, E-ATX, ATX, mATX, ITX	Huge storage potential Old as fuck so likely to be cheap Crazy amount of 5.25 bays can be converted to 3.5in Hot Swap bays using adapters	Good adapters can be somewhat pricey Harder to find

Rack cases

While rack mount cases are designed to be used on a rack, some opt to use them without one. Consider Lack Rack for a cheap way to mount your server. Disk shelves are for hard drives only. Only use them if you already have a main server that has an external SAS HBA.

Make sure you check the depth of your rack before buying anything, some rack mount servers are incredibly long and might not fit a small 17” deep rack.

1U⠀

None at the moment

2U⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
	Supermicro SuperChassis 826 (several SKUs)	12 (24 Disk Shelf)	2 (Some SKUs. Rear Hotswap bays)	ATX, E-ATX, EE-ATX (Depends on SKU)	Some SKUs support SAS and Sata drives Convenient Hotswap bays Two high quality redundant 1U power supplies Great build quality	Some SKUs only support proprietary motherboards. Check the website Restrictions on expansion card height. Expansion slots are all half height Restrictions on CPU cooler height Huge and heavy Lots of drives use a lot of electricity Expensive Small fans are loud, especially at heavy loads

3U⠀

Image	Name	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
	Norco-3216	16	2	EEB, CEB, ATX mATX, ITX	Huge capacity Support SAS and Sata Convenient Hotswap bays Supports a wide range of motherboards	Only supports one standard ATX PSU Huge and heavy Lots of drives use a lot of electricity

4U⠀

Image	Name	Price (USD)	Number of 3.5in drive bays	Number of 2.5 in drives bays	Supported Form Factors	Pros	Cons
	Rosewill RSV-L4*** (several SKUs)	$199	9-15 (depends on SKU)	0	E-ATX ATX	Large drive capacity Cheap Large enough to accommodate some consumer-grade parts (120mm case fans, cpu coolers, etc.), so it can run quieter than a typical server chassis Front optical drive bays (depends on SKU) Certain SKUs have combinations of modular, regular/hotswap bays; the modular bays can also be purchased separately and interchanged. Certain SKUs have a front mesh filter	Only supports one standard ATX PSU Huge and heavy Lots of drives use a lot of electricity Build quality may vary - particularly with motherboard standoff mounts and modular bays Front mesh filter doesn't work particularly well and isn't easily removable for cleaning
	Netapp DS4246/DS4243		24	0	n/a	Huge capacity Support SAS and Sata Convenient Hotswap bays	DISK SHELF ONLY Huge and heavy Lots of drives use a lot of electricity
	Supermicro SuperChassis 846		24	2	EE-ATX, E-ATX, ATX (Depends on SKU)	Huge capacity Support SAS and Sata Convenient Hotswap bays Two high quality redundant 1U power supplies Some models support separate battery backup modules Great build quality 7-13 full height expansion slots (Depends on SKU) Can be modded for more quiet operation	Huge and heavy Lots of drives use a lot of electricity Expensive
	Codegen 600mm 4U Rackmount Server Case,		8 (up to 13 with 5 bay 5.25 adapter)	0	E-ATX/ATX	Cheap Removable Air Filter Compact for being 600mm deep Can purchase rail kits cheap and easily(£35) 3x5.25 slots, Can be populated with 3.5in adapter for more storage	Single ATX PSU Ugly interior, not great finish Big lip on back panel. Can be annoying to remove RJ45 jacks if orientated on your mobo in a certain way
	Silverstone RM44	$349.99	2	4 (7 if no 3.5")	SSI-EEB, SSI-CEB, Extended ATX, ATX, Micro-ATX, Mini-ITX	Supports 360mm liquid cooling radiator or 3x 120mm fans (not included) 2x 80mm fans (included)	Expensive Low disk capacity CPU cooler height: 148mm (137mm with expansion card retainer)
	Sliger 4U Chassis - Multiple configurations	$229-$399	0-10	0-8	SSI-EEB, SSI-CEB, EATX, ATX, MicroATX, FlexATX, Mini-ITX, Mini-DTX	Supports 360mm liquid cooling radiator or 3x 120mm fans (not included)	Expensive, depending on configuration Some SKUs have limited storage

See also

Home server