Babbies First Linux

Pick your poison

Being a technology board, talk of different operating systems and distributions is common. You may desire to try a new OS after reading about them. For users looking to make the switch from Windows or Mac to a GNU/Linux distribution, here are some recommendations.

Installing an OS

It is recommended that you test out an OS in a Virtual Machine such as VirtualBox or run it from a Live CD/USB before installing it. This lets you test out the operating system without any permanant change to your system. You should also consider booting as a live CD to ensure good hardware compatability.

There are detailed instructions available on installing Linux Mint in a VirtualBox.

However, if you've decided to dedicate yourself to GNU/Linux -- getting it up and running isn't as daunting as one might think. First of all: you have to figure out what distribution you want, and what architecture your CPU has, and download the corresponding ISO. Do download it with torrent, or check the checksum after it has finished downloading. It will save you a lot of hassle if you get a corrupted ISO. There are multiple tools available for creating a GNU/Linux bootable USB from this ISO, where the most common ones are UNetBootin if you're already running GNU/Linux, and Win32ImageWriter if you're on a Windows system. Boot from the USB, follow instructions. Problems? Official distribution manual, or just make a thread on /g/ or make a post at /g/flt once you have searched exhaustively on Google.

Desktop Operating Systems

If you are looking for an OS for daily use, try one of these. Keep in mind that most of your software and games will not work if you don't have the time to fiddle with Wine. However, most software has an equal or better FOSS replacement. Check out osalt for more information on open source alternatives.

dpkg-based distros

Debian

debian.org

Debian is a great distro for both desktops and servers. It is the base of many distros, including Ubuntu and Mint. It comes in three variants: Stable, which lives up to its name and has a release cycle of 2 years. It is made by freezing Testing for a few months where bugs are fixed and packages with too many bugs are removed; then the resulting system is released as Stable. It is updated only if major security or usability fixes are incorporated. Because of that, many software would be outdated in 6 months and you won't get update, but you can use backports, it exists for a reason. It is commonly used by servers. Testing is the preview branch that will eventually become the next Stable. The packages included in this branch have had some testing in Unstable but they may not be fit for release yet. It contains newer packages than Stable but older than Unstable. This branch is updated continually until it is frozen. It is commonly used by desktop users. Unstable, always codenamed Sid, is the trunk. Packages are accepted without checking the distribution as a whole. This branch is usually run by software developers who participate in a project and need the latest libraries available, and by those who prefer bleeding-edge software. It is NOT recommended to use this unless you know what you're doing. It uses GNOME by default, but you can choose your favorite DE once you're installing it.

Ubuntu

ubuntu.com

Ubuntu is a common beginner's choice, and is despised by both /g/ and /tech/ for its default DE and Amazon spyware. While its default DE, Unity, might be confusing to some at first, Ubuntu is easier to learn than the majority of GNU/Linux distros except possibly Mint, has a fairly intuitive GUI that some might like and has a lot of support. It is based on Debian. Make sure that whatever variant you try is based off the latest LTS (Long Term Support) version. It is also somewhat customizable. This isn't a bad distro to try before something like Debian, Arch, or Gentoo if you want to start easy and work your way up. Just make sure if you pick normal Ubuntu to turn online searching off, as it sends your search info to Amazon and Canonical logs all of it. If you think Unity looks like shit, you may want to try a variant of Ubuntu. The most common variants are: You might try Xubuntu if you want a semi-lightweight OS with a somewhat spartan user interface. Xubuntu uses the "XFCE" Desktop environment. This desktop environment uses a dock as stock, similar to that of the OSX GUI. If you want a less spartan and more windows-like environment, Kubuntu is worth a try. It is much heavier on RAM, but also has a nice user interface to make up for this, with a lot of extra gadets. Lubuntu is the choice for the low-power machine, due to its low memory usage. Use this if you want to save RAM. Lubuntu uses the LXDE Desktop environment, which while hated by many people on /g/ and /tech/, is not too bad of a DE for low end computers, and a lot of its bad rap comes from its lackluster interface and its earlier days when it was more glitchy. You might want to check out i3 and GNU/Linux optimization tips at some point though if you are not satisfied. Users who prefer a Windows GUI may prefer LXDE. Ubuntu GNOME fully utilizes GNOME 3. Ubuntu MATE is a perfect distro for those who want to relive the glorious days of Ubuntu (pre-11.04).

Linux Mint

linuxmint.com

Linux Mint is a distribution based off Ubuntu. Linux Mint comes in the flavors of KDE, XFCE, Cinnamon, and MATE. Linux Mint is very comparable in ease of use if not better than Ubuntu for beginners and people who want something that "just werks™". It comes polished off without the integration of Amazon services, but it installs proprietary software like Flash by default, so be prepared to remove shit after install. However, because it is based on Ubuntu LTS, its package is a bit ancient. It is also somewhat customizable. This isn't a bad distro to try before something like Debian, Arch, or Gentoo if you want to start easy and work your way up.

Bunsen Labs

bunsenlabs.org

Bunsen Labs is a lightweight Debian-based distro, it is CrunchBang's "officially endorsed" community continuation since Crunchbang discontinued its development. Although mostly it is aimed at experienced users, it can be used as a means of educating newer users of GNU/Linux due to the intuitive nature of openbox. If you're willing to learn how to edit configuration files, you may learn a little bit of something on the way. Overall, it's user-friendly while providing convenience to more experienced users.

rpm-based distros

Fedora

getfedora.org

Fedora is almost as user friendly as Ubuntu but with the advantage of having more up to date packages and better upgrade between distro versions. However, its repositories are not nearly as large because it does not allow proprietary and patented software, but you can add repositories quickly and easily that fixes that. If you add RPM Fusion, you can have access to almost any program you will need. Also check Fedora's COPR, they work similar to PPA and are additional repos for specific software. Fedora is available in three official spins with Workstation being a GNOME Desktop spin. There are also other spins like KDE, Xfce, Cinnamon, MATE, etc. It is recommended to use netinstall and then choose which packages you want to install, but only do this if you have an un-throttled stable high-speed internet connection. Fedora spins: https://spins.fedoraproject.org/

OpenSUSE

opensuse.org

OpenSUSE is a commonly used distro. Like most Linux distributions, openSUSE includes both a default GUI and CLI option. During installation, the user may choose among KDE 4, GNOME, LXDE and XFCE GUIs. openSUSE supports thousands of software packages across the full range of Free software / open source development. It uses zypper for its package manager. It has a predictable release cycle and also a rolling release version - openSUSE Tumbleweed.

Mageia

File:Mageia.png mageia.org

Mageia is a fork of Mandriva Linux formed in September 2010 by former employees and contributors to the popular French Linux distribution. Unlike Mandriva, which is a commercial entity, the Mageia project is a community project and a non-profit organisation whose goal is to develop a free Linux-based operating system.

pacman-based distros

Arch

archlinux.org

Arch is a distro known for its KISS policy and The Arch Way. Known for its rolling release and bleeding edge packages, it uses pacman as its package manager, which is very simple to some users. A base install of ArchLinux takes only less than 800MiB space of disk. It is common for ricers to use Arch because of its minimal base installation, allowing you to choose your own packages. It is also known for its wiki, which has an extensive documentation of nearly everything in GNU/Linux, and the AUR (Arch User Repositories), dubbed as the biggest software repository in the world. You can also use its installer: Archboot, it installs Arch, with no Antergos/Manjaro bloats, and with no hassle. See Archboot on ArchWiki.

Antergos

antergos.com

Antergos is a distribution based off Arch, basically it is just Arch Linux with a nice installer. Unlike Manjaro, Antergos fully utilize ArchLinux's repository instead of making its own repository. By default, Antergos' Live ISO boots to GNOME 3 (unless you use Antergos netinstall, which uses Openbox), but when you start to install it, there are around 6 desktops (5 DE and 1 WM) to choose from its installer. The perk of using Antergos is, of course, the access to AUR.

Manjaro

manjaro.github.io

Manjaro is a distribution based off Arch, in many ways similar to Linux Mint, this distribution also focuses on user-friendliness, claiming that the user will never have to use the terminal. Despite being Arch-based, Manjaro uses its own repository and hold Arch's packages, claiming that everything from Arch is tested first. It comes with numerous tools pre-installed, similar to those in Linux Mint, from Steam to LibreOffice. Its default DEs are either XFCE or KDE, but there are also numerous DEs and pure WMs you can choose from. Being Arch-based, that means you can have access to the AUR. Manjaro contains a great deal of software in the default installation and its maintainers are known for asking their users to travel back in time and totally not being fans of Nine Inch Nails

portage-based distros

Gentoo

gentoo.org

Gentoo is actually not a bad choice at all. But if you make a thread asking for help, expect a ton of "Install Gentoo" responses. A common misconception is that gentoo is actually very hard to install. If you have patience, a few hours to burn, and can read a manual, it's not actually hard. What is annoying is maintaining gentoo after you have it installed, and if you have a slow machine, compiling programs can be a pain in the ass. There are binary packages available in portage.

Funtoo

funtoo.org

Funtoo is a Gentoo-based distro that uses git to sync repositories. The distro can also be installed from the Gentoo LiveCD.

Calculate Linux

calculate-linux.org

Calculate Linux is a hassle-free Gentoo-based distro (with a proper installer) that 'just werks'. It's quite literally Gentoo with sane defaults and a few extra scripts to make your life easier. Worry not, you can still compile the kernel from scratch quite easily to remove the genkernel bloat, or even remove the calculate overlay and calculate-utils entirely, to make it 100% Gentoo.

Independent Distros

Distros that do not fit inside a category will be added here until an appropriate category is made.

Slackware

slackware.com

Slackware is a Linux distribution created by Patrick Volkerding in 1993. Originally based on Softlanding Linux System, Slackware has been the basis for many other Linux distributions, most notably the first versions of SUSE Linux, and is the oldest currently being maintained. Slackware aims for design stability and simplicity and to be the most "Unix-like" Linux distribution. It makes as few modifications as possible to software packages from upstream and tries not to anticipate use cases or preclude user decisions. In contrast to most modern Linux distributions, Slackware provides no GUI installation procedure and no automatic dependency resolution of software packages. It uses plain text files and only a small set of shell scripts for configuration and administration. Without further modification it boots into a CLI environment. There is no formal issue tracking system and no official procedure to become a code contributor or developer. The project does not maintain a public code repository. Bug reports and contributions, while being essential to the project, are managed in an informal way. All the final decisions about what is going to be included in a Slackware release strictly remain with Slackware's benevolent dictator for life, Patrick Volkerding.

Puppy Linux

puppylinux.org

Puppy is a distribution aimed at being lightweight, fast, easy and portable. Puppy Linux can be run entirely from RAM. It is meant to be booted from a CD or USB as opposed to being installed. Variations such as Racy Puppy exist.

Void Linux

voidlinux.eu

Void Linux is a Linux distribution utilizing the xbps package manager. Although in some ways similar to Arch, it uses runit as its init as opposed to systemd or Gentoo's OpenRC, it also uses LibreSSL security library from OpenBSD and the availability of an x86_64-musl port with the musl C library.

Alpine Linux

alpinelinux.org

Alpine Linux is a mostly GNU-free Linux distro, using musl-libc and busybox instead of your usual GNU utilities. It is primarily designed for "power users who appreciate security, simplicity and resource efficiency". It uses PaX and grsecurity patches in the default kernel and compiles all user space binaries as position-independent executables with stack-smashing protection.

FSF-approved Distributions

The Free Software Foundation maintains its own list of GNU/Linux distros that "respect user's freedom". You can check what distros that FSF endorses here.

Servers

You may be interested in GNU/Linux as a server as opposed to a desktop. While less commonly asked about, it is still quite common.

Debian

Debian is one of the best operating systems to use for a server. Stable, rock solid and not too hard to manage, but at the same time customizable enough for your server's purposes.

Ubuntu Server

Ubuntu server is based off of Debian testing. While this means it does have the slight chance of being not as stable as Debian Stable, it still is a great choice for a server OS. Recent LTS releases have focused on providing heavy integration with Openstack, providing an out of the box turnkey solution to run an OpenStack Icehouse environment in a public, private, or hybrid cloud.

CentOS

CentOS is a Linux distribution that attempts to provide a free, enterprise-class, community-supported computing platform which aims to be functionally compatible with its upstream source, Red Hat Enterprise Linux. Basically is a free clone of RHEL that has the backing of RedHat. The difference is that you don't have the same level of enterprise support you get from RedHat when you buy a RHEL License. But for most issues you will find community support on the internet.

CentOS is a really stable and effective Server distribution but like Fedora and other RedHat backed distributions it only has Free Software on it's repos. If you want to have more software options you need to add additional repos. RepoForge is a good repository for CentOS and other Enterprise Linux compatible distros.

CentOS download:

https://wiki.centos.org/Download

Adding RepoForge on EL 7:

sudo dnf install http://pkgs.repoforge.org/rpmforge-release/rpmforge-release-0.5.3-1.el7.rf.x86_64.rpm

Specialist distributions

Some distros serve other purposes, such scanning for malware, data forensics, penetration testing or several other purposes.

• GParted - a live distro aimed at helping users partition their disks
• Kali - an Ubuntu-based distro aimed at penetration testing
• Tails is a live system that aims to preserve your privacy and anonymity. It helps you to use the Internet anonymously and circumvent censorship almost anywhere you go and on any computer but leaving no trace unless you ask it to explicitly. It is used by Edward Snowden.
• Liberté Linux - Much like Tails, but more lightweight.
• Qubes OS is a security-focused RPM-based distro that aims to provide security through isolation. Virtualization is performed by Xen.
• iPredia - A debian based distro designed for i2p users. This has many i2p applications included such as Robert torrent client, and imule.

External links

http://distrowatch.com/